Connect via client VPN with iOS devices

To configure an iOS device to connect to the client VPN, follow these steps:

1. Navigate to Settings > General > VPN > Add VPN Configuration
2. Type: Set to L2TP
3. Description: This can be anything you want to name this connection, for example, “Work VPN”
4. Server: Enter the hostname (e.g. .com) or the active WAN IP(e.g. XXX.XXX.XXX)
   • Hostname is preferred to improve reliability during WAN failover
   • This information is located in the Meraki dashboard under Security appliance > Monitor > Appliance status

5. Account: Enter the username
6. Password: Enter if desired
   • If the password is left blank, it will need to be entered each time the device attempts to connect to the client VPN

7. Secret: Enter the shared secret that admin created in Security appliance > Configure > Client VPN settings
8. Ensure that Send All Traffic is set to on
9. Save the configuration